Virtually unlimited data storage and fully capable of downloading data to PC for archiving and graphic reporting using free IvieXLS (Microsoft Excel Template) software (included with any IE-33 purchase).

Internal battery life capable of running about 2 hours in full energy burn mode. Standard HP/Compaq accessory battery (highly recommended Ivie part #EP-1840) adds another two hours in full energy burn mode.

Inputs: Mic/Channel 1, Channel 2
Outputs: 3.5mm stereo jack

RTA (FFT-based):
-- Accuracy +/- 0.5dB
-- 1/1, 1/3, 1/6 octave bands from 20Hz to 20kHz
-- Max resolution of 2048 data points (diplayed at 240 freq. data points... much greater than 1/2 octave.)
-- Selectable weighting filters: Flat, A, and C weighting... and octave filters at 125Hz, 250 Hz, 500Hz 1 kHz, 2 kHz, and 4 kHz
-- Detectors: fast, slow, peak, impulse
-- Three display integration times (adjustable display decay 1, 2 and 3)
-- Peak detect and hold
-- Frequency detection display
-- Low freq. zoom (20Hz to 2kHz at 1Hz resolution)
-- Powerful averaging (continuous or trigger mode)
-- NC/NR
-- (F)STC, STC, (N)NIC, NIC
-- Easy subtraction
-- Multiple scratch pad memories
-- Unlimited storage capability

SPL Monitor:
-- 4 Digit readout with 0.1dB resolution
-- Large digital display with two user adjustable SPL threshold warnings
-- Bar graph display
-- Response modes: fast, slow, peak, impulse
-- Selectable weighting filters: Flat, A, and C weighting... and octave filters at 125Hz, 250 Hz, 500Hz 1 kHz, 2 kHz, and 4 kHz
-- Meets ANSI S1.4-1983 Type II with standard Ivie mic; Type I with optional Ivie mic (1134) and preamp (IE-2P)

Seat-to-Seat:
Measure Seat-to-Seat SPL variation in all pass, several octave bands, with and without weighting. Easy to read graphic display with digital and bar graph readout.

Strip Chart:
-- Unique strip chart display shows amplitude over time
-- User settable time scale from continuous to up to 8 hours
-- Acoustic Time Study Graph
-- Detectors: fast, slow, peak, impulse
-- Selectable weighting filters: Flat, A, and C weighting... and octave filters at 125Hz, 250 Hz, 500Hz 1 kHz, 2 kHz, and 4 kHz
-- Data can be stored to a log file and transported to a PC for manipulation and display

Polarity:
Using the IE-33's built in signal generator (3.5mm stereo jack) or using a separate compatible generator (CD with compatible pulse comes with IE-33 purchase), easily check polarity of distributed and other speaker systems acoustically and electrically.

Scope:
-- Allows visualization of wave forms
-- Standard and XY
-- Dual trace

Signal Generator:
-- Pink noise
-- White noise
-- Sine waves
-- Square waves
-- Triangle waves

Audio Level Volt Meter:
-- Large analog and digital display
-- User selectable scale
-- Measures AC Volts, dBu, dBV and AC V
-- Detectors: fast, slow, peak, impulse
-- Selectable weighting filters: Flat, A, and C weighting... and octave filters at 125Hz, 250 Hz, 500Hz 1 kHz, 2 kHz, and 4 kHz

Downloading to a PC:
Since the iPAQ operating system is Microsoft® Pocket PC®, measurement data in storage registers can be easily downloaded to a PC by using Microsoft ActiveSync® software (included with any IE-33 purchase). Files are stored in tab-delimited format and are viewed using IvieXLS graphic software (for use with Microsoft Excel® or any other compatible means).

Microphone
Element = electret condenser
Directional pattern = omni directional
Freq response = 20Hz to 20kHz
Remotable with several optional cable lengths

(Content from the Ivie website listed above)